Dump trucks, tractors, cargo trucks and concrete mixers made by Beifang Benchi Heavy-Duty Truck Group Co., Ltd.
Beiben North Benz ND11600B41J cargo truck manufactured by Baotou BeiBen Heavy-Duty Truck Co., Ltd. (North Benz)
ND11600B41J
Beiben North Benz Chinese cargo truck ND11600B41J manufactured by Baotou BeiBen Heavy-Duty Truck Co., Ltd. (North Benz) (a heavy duty truck manufacturer in Baotou, Inner Mongolia Autonomous Region (Neimenggu), China; manufactures a range of Beiben North Benz vehicles, including cargo trucks); the cargo truck based on ND11600B41J chassis. Max. speed is 85 km/h, cab seating capacity is 2, 3, rated capacity is 7965, 7900 kg, optional ABS, gross vehicle weight is 16000 kg, wheelbase is 4100+1350 mm, engine: WP7.270E30 / WP10.270 / WP10.270NE31 / WP10.270E32, tires are 9.00-20-10PR, 9.00R20-10PR, cargo body is 6200/6500 × 800 × 2300 mm, diesel fuel, curb weight is of the China truck 7905 kg, environmental standard is National III / Euro 3, total mass of trailer is 22800, 23400, 23000 kg.
Technical Specifications of the China truck Beiben North Benz
Baotou, Inner Mongolia Autonomous Region (Neimenggu), China.
Vehicle chassis
ND11600B41J
Engine of the China truck Beiben North Benz ND11600B41J
#
Engine Model
Engine Displacement
Engine Power
Engine Manufacturer
1
WP7.270E30
7140 cc
199 kW (271 hp)
Weichai Power Co., Ltd.
2
WP10.270
9726 cc
199 kW (271 hp)
Weichai Power Co., Ltd.
3
WP10.270NE31
9726 cc
199 kW (271 hp)
Weichai Power Co., Ltd.
4
WP10.270E32
9726 cc
199 kW (271 hp)
Weichai Power Co., Ltd.
General Engine Specifications
Fuel
diesel fuel
Environmental standards compliance
National III / Euro 3
Dimensions and Weights of the China truck Beiben North Benz ND11600B41J
Dimensions and Weight Specifications of the China truck
Overall Dimensions of the China truck
Overall length (mm)
8950/9090
Overall width (mm)
2500
Overall height (mm)
3260
Cargo Body Dimensions
Cargo body length (mm)
6200/6500
Cargo body width (mm)
800
Cargo body height (mm)
2300
Weights, Ground Pressure and Capacity
Rated capacity (kg)
7965, 7900
Curb weight of the China truck (kg)
7905
Gross vehicle weight (kg)
16000
Load factor (payload to weight ratio)
1.02
Axle load distribution (kg)
5500/10500 (tandem axle)
Total mass of trailer (kg)
22800, 23400, 23000
Wheel Base and Track
Wheelbase (mm)
4100+1350
Front track (mm)
1940
Rear track (mm)
1847/1847
Front/rear overhang (mm)
1410/2090, 1410/2230
Angle of Approach and Departure
Angle of approach (deg.)
24
Angle of departure (deg.)
13
Wheels and Tires
Tires and Wheels of the China truck Beiben North Benz ND11600B41J
Number of axles
3
Number of tires
10
Tires dimension
9.00-20-10PR, 9.00R20-10PR
Misc. Specifications
Miscellaneous Specifications Beiben North Benz ND11600B41J (cargo truck)
Max. speed
85
ABS
optional
Cab seating capacity
2, 3
Steering
steering wheel
Leaf springs
3 / 4, 9 / 10
Additional Information
1.WP7.270E30 engine corresponding VIN for LBZF21EB ×××××××××, WP10 series engine corresponding VIN for LBZF26EB ×××××××××; 2.WP7.270E30, WP10.270, WP10.270NE31 , WP10.270E32 maximum net power (kW) respectively 194,197,195,195.3. The car allows trailer trailer (when towing a trailer, the vehicle must be equipped with ABS), engine WP7.270E30, WP10. 270, WP10.270NE31, WP10.270E32 corresponding quasi-total mass of trailer (kg) respectively 22800,23400,23000,23000. Car length, within the cargo box steeplechase in size (length), rear overhang correspondence is: 8950 corresponding 6200,2090; 6500,2230 9090 correspondence. Standard cab ride corresponding 2,3 people were 7965,7900 rated load quality. Allow the car trailer trailer (trailer when the trailer, the car must be equipped with ABS), ABS system controller models 0486107007, Manufacturer: Knorr-Bremse Equipment (Shanghai) Co., Ltd. Materials guards for Q235A, bolt connection, cross-sectional dimensions of the rear protective device 50 × 120, ground clearance is 500mm. This car has been equipped with tachograph. (Note: possible inaccuracies)
Photo gallery of the China truck Beiben North Benz ND11600B41J
